INOmatte reimagines the protection of INOclear with a stealthy satin finish that delivers reliable 7.5mil surface protection and a bold OEM-inspired look. This film defends against wear while transforming your paint with aggressive style and clarity.
DYNAMIC PPF
INOmatte
Paint Protection Film
Sleek Matte/Satin
OEM Finish
7.5mil Reliable
Surface Protection
Self-Healing &
Stain-Resistant PPF
Hydrophobic and
UV Resistance
Key Benefits
Satin Matte Finish with Built-In Protection
INOmatte brings a refined satin finish that mirrors OEM matte paint. It highlights design contours with a frozen visual effect and defends against light scratches using self-healing technology for a clean, modern appearance.
7.5mil TPU Protection Against Chips & Wear
7.5mil TPU thickness delivers robust chip and abrasion protection while preserving INOmatte’s refined satin finish. Heat-activated self-healing technology lifts light scratches and swirl marks over time, keeping the frozen matte look flawless.
Hydrophobic & Stain-Resistant Topcoat
An advanced hydrophobic top layer repels water, bug acids, and contaminants to resist staining and reduce maintenance. Your wrap stays cleaner longer, even in harsh conditions.
Easy Installation + Long-Term Warranty
With its medium-tack adhesive, INOmatte is installer-friendly and conforms easily to complex curves. Backed by a 10-year warranty against yellowing, bubbling, cracking, and delamination.
Specifications
Dynamic Paint Protection Film Specifications
| Property | Typical Values (Avg) | Testing Conditions | Standard Used |
|---|---|---|---|
| Weather Resistance | No visible discolouration or deformation after 1000 hours | Xenon Arc Aging, Cycle 1 – 102 min light @ 63 °C + 18 min light & water spray (65 °C board temp, 50 % RH) | ASTM G155-21 |
| Color Retention (ΔE) | ΔE < 2 | Before / after 1000 hr xenon exposure | ASTM D2244-25 |
| Tensile Strength | 31.6 MPa (avg) | 500 mm/min (20 in/min), 25 °C / 55 % RH | ASTM D882-18 |
| Elongation at Break | 333% (avg) | 500 mm/min (20 in/min), 25 °C / 55% RH | ASTM D882-18 |
| Peel Strength (20 min) | 6.42 N/cm (avg) | 180° peel on glass substrate, 300 mm/min | ASTM D3330-04 |
| Peel Strength (72 hrs) | 8.26 N/cm (avg) | 180° peel on glass substrate, 300 mm/min after 72 h ageing | ASTM D3330-04 |
| Laboratory Environment | 25 ± 3 °C / 55 ± 20 % RH | Standard lab ambient conditions | — |
| Film Thickness | 7.5 mil (190 µm) | Measured sample | — |
| Sample Appearance | Matte finish, uniform surface, no defects before test | Visual inspection | — |
Frequently Asked Questions
Get clear answers to common questions about our products, services, and processes. If you need further assistance, our team is always here to help—just reach out.
What does PPF protect against?
It shields your vehicle from rock chips, scratches, swirl marks, bug acids, water spots, UV rays, and road debris—helping preserve your paint’s condition and resale value.
Will PPF stain or yellow over time?
PPF may yellow or stain if improperly maintained or exposed to harsh conditions. INOZETEK films feature a hydrophobic topcoat to reduce staining. Warranty covers yellowing due to film defect.
How does INOmatte compare to INOclear and INOcolor?
INOmatte delivers a refined satin/frozen finish with 7.5mil TPU protection — ideal for owners wanting a matte factory look without repainting. INOclear preserves the original gloss paint, while INOcolor changes the vehicle’s colour entirely. All three share the same self-healing, hydrophobic top coat and 10-year warranty.
How do I maintain my PPF?
Hand wash regularly using pH-neutral soap and microfiber cloths. Avoid letting dirty water dry in the sun and steer clear of automatic car washes with brushes or harsh chemicals.
Can I apply ceramic or graphene coating over PPF?
Yes. Apply INOZETEK Graphene Coating or Ceramic Spray to extend hydrophobic performance. Reapply spray every 3–6 months for optimal effect.
How long does INOZETEK PPF last?
With proper care, INOZETEK PPF lasts up to 10 years. Longevity depends on driving conditions, climate, and maintenance.
What is covered under the warranty?
INOZETEK offers a 10-year limited warranty against yellowing, bubbling, cracking, and delamination. Warranty claims must go through an INOZETEK Shield Network dealer.
When can I wash the car after PPF installation?
Wait 14 full days before washing or detailing to allow the film to fully cure and bond. During this curing period, avoid pressure washing, automatic car washes, and letting rain or dirty water dry on the surface.
What should I avoid after install?
Avoid using automatic car washes with brushes, as they can damage the film. Do not use high-pressure washers near the edges of the PPF, as this may lead to peeling or lifting. Refrain from washing the vehicle in direct sunlight, since water and soap can dry too quickly and cause streaking. Additionally, avoid letting rain or dirty water dry on the surface, as this can leave behind water spots and mineral stains.
Find an Authorised Dealer / Distributor
Ready to apply INOmatte’s premium satin finish? Find your nearest authorised Inozetek installer today.
Become a Dealer / Distributor
Are you looking to become an authorised INOZETEK dealer or distributor? Get in touch with us.
