InoClear paint protection film is engineered to deliver an exceptional ultra-high gloss finish while offering cutting-edge protection and effortless maintenance. With a thickness of 7.5 mil, this film provides the perfect balance of flexibility and durability.
DYNAMIC PPF
INOclear
Paint Protection Film
High Gloss Finish
Showroom-Quality
7.5mil Reliable
Surface Protection
Self-Healing &
Stain-Resistant PPF
Hydrophobic and
UV Resistance
Key Benefits
Ultra Gloss Finish with Self-Healing Tech
Built with a 7.5mil thick TPU layer, INOclear shields your vehicle from road debris, stone chips, and everyday surface damage without compromising flexibility or clarity.
7.5mil TPU Protection Against Chips & Wear
Achieve a deep, mirror-like shine with built-in self-healing protection. INOclear delivers a premium, paint-like gloss while using heat-activated tech to erase light scratches and swirl marks over time.
Hydrophobic & Stain-Resistant Topcoat
An advanced hydrophobic top layer repels water, bug acids, and contaminants to resist staining and reduce maintenance. Your wrap stays cleaner longer, even in harsh conditions.
Easy Installation + Long-Term Warranty
Medium-tack adhesive ensures a smooth, bubble-free install with strong edge hold and excellent conformity. Backed by a 10-year limited warranty against yellowing, bubbling, cracking, and delamination.
Specifications
Dynamic Paint Protection Film Specifications
| Property | Typical Values (Avg) | Testing Conditions | Standard Used |
|---|---|---|---|
| Weather Resistance | No visible discolouration or deformation after 1000 hours | Xenon Arc Aging, Cycle 1 – 102 min light @ 63 °C + 18 min light & water spray (65 °C board temp, 50% RH) | ASTM G155-21 |
| Colour Retention (ΔE) | ΔE < 2 | Before / after 1000 hr xenon exposure | ASTM D2244-25 |
| Gloss Retention (60°) | > 90% retention | Measured before / after weathering at 60° angle | ASTM D523-25 |
| Tensile Strength | 31.3 MPa (avg) | 500 mm/min (20 in/min), 25 °C / 55% RH | ASTM D882-18 |
| Elongation at Break | 281% (avg) | 500 mm/min (20 in/min), 25 °C / 55% RH | ASTM D882-18 |
| Peel Strength (20 min) | 5.15 N/cm (avg) | 180° peel on glass substrate, 300 mm/min | ASTM D3330-04 |
| Peel Strength (72 hrs) | 6.84 N/cm (avg) | 180° peel on glass substrate, 300 mm/min after 72 h ageing | ASTM D3330-04 |
| Laboratory Environment | 25 ± 3 °C / 55 ± 20% RH | Standard lab ambient conditions | — |
| Film Thickness | 7.5 mil (190 µm) | Measured sample | — |
| Sample Appearance | Uniform surface, no defects before test | Visual inspection | — |
Frequently Asked Questions
Get clear answers to common questions about our products, services, and processes. If you need further assistance, our team is always here to help—just reach out.
What does PPF protect against?
It shields your vehicle from rock chips, scratches, swirl marks, bug acids, water spots, UV rays, and road debris—helping preserve your paint’s condition and resale value.
Will PPF stain or yellow over time?
PPF may yellow or stain if improperly maintained or exposed to harsh conditions. INOZETEK films feature a hydrophobic topcoat to reduce staining. Warranty covers yellowing due to film defect.
How does INOclear compare to INOclear+ and INOmatte?
INOclear offers a high-gloss finish with 7.5mil protection. INOclear+ adds extra thickness for demanding environments. INOmatte provides a satin/frozen look while delivering the same protective benefits.
How do I maintain my PPF?
Hand wash regularly using pH-neutral soap and microfiber cloths. Avoid letting dirty water dry in the sun and steer clear of automatic car washes with brushes or harsh chemicals.
Can I apply ceramic or graphene coating over PPF?
Yes. Apply INOZETEK Graphene Coating or Ceramic Spray to extend hydrophobic performance. Reapply spray every 3–6 months for optimal effect.
How long does INOZETEK PPF last?
With proper care, INOZETEK PPF lasts up to 10 years. Longevity depends on driving conditions, climate, and maintenance.
What is covered under the warranty?
INOZETEK offers a 10-year limited warranty against yellowing, bubbling, cracking, and delamination. Warranty claims must go through an INOZETEK Shield Network dealer.
When can I wash the car after PPF installation?
Wait 14 full days before washing or detailing to allow the film to fully cure and bond. During this curing period, avoid pressure washing, automatic car washes, and letting rain or dirty water dry on the surface.
What should I avoid after install?
Avoid using automatic car washes with brushes, as they can damage the film. Do not use high-pressure washers near the edges of the PPF, as this may lead to peeling or lifting. Refrain from washing the vehicle in direct sunlight, since water and soap can dry too quickly and cause streaking. Additionally, avoid letting rain or dirty water dry on the surface, as this can leave behind water spots and mineral stains.
Find an Authorised Dealer / Distributor
Are you looking to install INOclear Dynamic PPF? Find an authorised Dealer or Distributor today.
Become a Dealer / Distributor
Are you looking to become an authorised INOZETEK dealer or distributor? Get in touch with us.
